Ceramic Finish #900

Ceramic coating that reflects and disperses heat

An extremely durable, adhesive and heat reflecting coating based on ceramic particles.

  • Roofing (metal, built-up, lightweight concrete, polyurethane, modified bitumen, aluminium).
  • Exterior and interior walls .
  • Ceilings (plaster, drywall and cathedral).
  • Steam pipes, ductwork for heating and air conditioning, tanks (chemical storage, boilers and food preparation), refrigeration units and trucks.

MAINTENANCE

Shelf life 12 months
Storage Do not store in direct sunlight or near high heat sources
Storage temperature Between 4,5°С and 45°С
Remarks During long-term storage it is recommended to shake or to turn the pails upside down every 3 months in order to retard complete separation of solvents and solids.

HEALTH AND SAFETY

Numastec Ceramic Finish #900 is non-toxic. See Material Safety Data Sheet for more information.

QUICK FACTS

Color Standard: White (Available in 30 colours)
Weight/litre: 1,22 kg
Solids content In volume: 55%
In weight: 59%
Dry film thickness 150 microns per layer
Coverage rate 1,5 ²/l- 1,8 ²/l
Tensile strength 0,76 Mpa
Prime pigments Titanium
Fungal resistance Highest rating
Solvent type Water
Flash point Non-flammable
Drying times
To touch 1-2 hours
Full dry 48 hours at 24°С
Full cure 21 days
Roller Deep nap (2,5 em or longer) industrial roller
Airless spray Pressure: min. 200 bars.
Discharge capacity: min. 8 1/min.
Tip size: 0,8 mm to 0,9 mm
Remarks An application of two or more coats would be necessary to achieve an average minimum of 300 microns for an optimum product performance.